سولار كيبل مقاس 4 مم مربع طول 100 متر موديل Solar Cable 4 MM 1500VDC RR Kabel roll 100m

د.إ390.00

Solar Cable 1500VDC 4 mm2

  • كيبل سولار يستخدم مع محطات الطاقة الكهروشمسية و التطبيقات المشابهة
  • يمكن تركيبه في الهواء أو تحت الأرض
  • يمكن أستخدامه في التمديدات الداخلية والخارجية
  • يمكن أستخدامه في المناطق  ذات الخطورة العالية ( غاز , إنفجار ) وذلك بسبب العازل والحماية الموجودة في الكيبل.

 

Standard

Adapted to PV systems, 2 Pfg 1169 / 08.2007.

Thermal parameters

Max. Permissible Ambient Temperature: +90°C (stationary and in motion)
Max. Permissible Operating Temperature of The Conductor : +120°C, Interpretation according to IEC 60216: permanent temperature.
120°C for 20,000 h ( = 2.3 years ), at max. 90°C permanent temperature (= 30 years).
Short – Circuit Temperature : +200°C
(at the conductor max. 5 sec.)
Damp – Heat Test : According to EN 60068 – 2 – 78.1,000h at 90°C and 85% humidity.
Min. Permissible Ambient Temperature : -40°C
(stationary and in motion)
Resistance to Cold : Bending test at low temperature according to DIN EN 60811 -1 -4, Impact test similar to DIN EN 50305.
Minimum Bending Radius : Fixed Installation approx. 4 x cable Ø,

Electrical Parameters

Voltage Rating : AC 0.6 / 1.0 kV
Max. PV – System Voltage : DC up to 2.0 kV possible
Max. Permissible Operating Voltage in AC Systems : 0.7 / 1.2 kV
Max. Permissible Operating Voltage in DC Systems : 0.9 / 1.8 kV
Test Voltage: AC 6 kV/ DC 10 kV (15 min.)

Mechanical Parameters

Tensile Load :15 N / Sq. mm in operation. 50 N/Sq. mm during installation
Shrinkage Test : According to EN 60811 -1 – 3
Shore-Hardness : 85 shore A according to DIN EN 53505
Pressure Test at High Temperature : According to EN 60811-3-1
Dynamic Penetration Test : According to requirements for cables for PV systems, DKE/VDE 411.2.3

Chemical Parameters

Mineral Oil Resistance : 24h, 100°C according to DIN VDE 0473 – 811 – 2 -1, DIN EN 60811-2-1
Acid and Alkaline Resistance : According to EN 60811-2-1
7 days, 23°C (N-Oxalic Acid, N-Sodium Hydroxide)
Ammonia Resistance : 30 days in saturated ammonia atmosphere (internal testing)
Weather Resistance : Ozone resistance according to DIN EN 50396 test Type B, HD 22.2 test Type B UV – resistance according to UL 1581 (Xenon – Test), ISO 4892 – 2 (Method A) and HD 506/A1-2.4.20
Absorption of water (gravimetric) according to DIN VDE 0473-811-1-3, DIN EN 60811 -1 – 3.
Behavior in Case of Fire : Flame propagation.
Single cable according to DIN VDE 0482 Part 332 -1 – 2, DIN EN 60332 -1 – 2.
Multiple cable according to DIN VDE 0482 Part 266 – 2 – 5, DIN EN 50305 – 9.
Low smoke emission according to DIN VDE 0482 Part 268 – 2.
DIN EN 50268-2 (light transmittance > 70%).
Corrosivity according to DIN EN 50267 – 2 – 2.
Toxicity according to DIN EN 50305, ITC – index < 3.

Cable Construction

Conductor : Annealed tinned copper, fine wire conductors, bunch stranded EN 60228 Cl. 5
Insulation : Crosslinked polyolefin (XLPO)
Core Identification : Red, black or natural
Sheath : Crosslinked polyolefin (XLPO)
Cable Colour: Black

Brand

Made in

المراجعات

لا توجد مراجعات بعد.

يسمح فقط للزبائن مسجلي الدخول الذين قاموا بشراء هذا المنتج ترك مراجعة.